Briture Co., Ltd.
Trust is the foundation of cooperation
Add to Cart
Synthetic Macro fiber wave form
Product Description
PP fibre Undee form can be instead of steel fibre in cement concrete for anti-crack. Easy to disperse and construct.
Features
1. Improve the supporting performance and bonding performance of concrete to produce effective secondary strengthening effect; Provide high residual strength of concrete and improve the durability of concrete;
2. Coarse fiber is most suitable for shotcrete, which can reduce rebound, reduce cost, form a thicker shotcrete layer, significantly improve bending strength, easy pumping and will not damage mechanical equipment.
3. All grades of concrete to provide good anti - fatigue, anti - shrinkage, anti - seismic and good toughness.
4. Simple operation, not easy to group, safety, reasonable price, cost savings..
5. It can be used in highly corrosive, humid environment.
6. The surface has been embossed, which greatly improved the cohesive force between fibers and concrete, and also boosts shrinkage
resistance and crack resistance.
Proposed Dosage
Suggestion of Additive rate: 5.4kg fibre in one cubic meter concrete. (not less than 2.7kg/M3)
Typical Application
Shotcrete, concrete engineering, such as foundations, roads, Bridges, DAMS, especially in the deformation and toughness of the higher
requirements of the project.
Specification
| Minimum Tensile Strength | ≥550MPa |
| Modulus | ≥9000Mpa |
| Fiber Dimension | L: 48mm/54mm/64mm;T: 0.55-0.60mm; W: 1.30-1.40mm |
| Melt Point | 170℃ |
| Density | 0.91g/cm3 |
| Melt flow | 3.5 |
| acid&alkali resistance | Excellent |
| Moisture Content | ≤0% |
| Appearance | Embossed |
Packing
5kg/ box, 1200-1300kgs/pallet, 12800kgs/1X20`FCL, 25600kgs/1X40`FCL.
FAQ:
Q: How long is your lead time?
A: The normal lead time is 5-10 days. It is according to the quantity and inquire of us before place any orders
Packing image:
