Briture Co., Ltd.
Trust is the foundation of cooperation
Add to Cart
PP Fiber Monofilament
Feature:
1. Easy to be dispersed in mortar or concrete and no agglomeration, it can guarantee the property of crack resistance effectively.
2. No need to change the proportion of mortar, just put the fibers into the mortar mixture and stir for a moment after adding water.
3. PP Fiber Monofilament with fine economic property: The equivalent diameter of the fiber is only φ 30um, so the ratio of diameter and surface area is high and on the basis of crack resistance, PP Fiber Monofilament can reduce the amount (to about 0.6kg/m 3 ).
4. Easy to plaster: As the great number of thin fibers spread into mortar evenly, the plastering is much easily and this can improve the binding strength between surface and base.
5. PP Fiber Monofilament with stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.
Applying Instruction:
A). Compound Amount. To resist the common cracks on surfaces, 0.6kg/m3 fibers to cement paint is enough, and for reinforced application 0.9- 1kg/m3 is enough.
B). Stirring requirement. The proportion of cement, sand and aggregate is no need to be changed. Put cement,aggregate, additive and fiber together, then stir after adding enough water (Do not stir without water!) and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely
| Index | Standard | Index | Standard |
| Raw Material | 100% virgin Polypropylene | Fiber Type | Monofilament (Microfiber) |
| Density(g/cm3) | 0.91 | Fiber Diameter (um) | 30+/-5 |
| Tensile Strength (Mpa) | 500 min. | Elastic Modulus (Mpa) | 4500 min. |
| Melting Point(ºC) | 160- 170 | Length (mm) | 6, 12, 18... |
| Crack Elongation (%) | 15-20 | Acid &Alkali Resistance | Strong |
