Briture Co., Ltd.
Trust is the foundation of cooperation
Add to Cart
Polypropylene Fiber (PP Fiber) is made from 100% virgin PP granular, after extruding from different mould and technology, we can get 4 different types of fiber, including Monofilament form, Fibrillated Mesh form, Twisted Bunchy and Wave form with different size. These fiber can improve the reinforcement of mortar or concrete performance effectively to make them strong and protect the projects.
| Raw Material | Polypropylene | Fiber Type | Mesh |
| Length (mm) | 6/12/18/38... | Width (mm) | 5 |
| Thickness (mm) | 0.035 | Equivalent Diameter (um) | 100 |
| Strength (Mpa) | 560-770 | Crack Elongation (%) | 15-20 |
| Melting Point (C degree) | 160-170 | Acid & Alkali resistance | Strong |
1. Easy to be dispersed in mortar or concrete and no agglomeration, it can guarantee the property of crack resistance effectively.
2. Easy to be used: No need to change the proportion of mortar, just put the fibers into the mortar mixture and stir for a moment after adding water.
3. It with fine economic property: The equivalent diameter of PP Fiber monofilament is only φ 0.02-0.03mm, so the ratio of diameter and surface area is high and on the basis of crack resistance, it can reduce the amount (to about 0.6-0.9kg/m 3 ).
4. Easy to plaster: As the great number of thin fibers spread into mortar evenly, the plastering is much easily and this can improve the binding strength between surface and base.
5. It with stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.
| Resist to shrink & crack | Increase seepage resistance |
| Increase friction resistance | Increase freezing & thawing resistance |
| Improve tendons protection | Replace steel net (using in plastering) |
| Prevent mortar split and crackle expansion | Increase impact resistance and peeling resistance |
