Briture Co., Ltd.
Trust is the foundation of cooperation
Add to Cart
Water-Base Solid Acrylic Resin BAW-563
(Similar to Joncryl 678 )
Features & Benefits:
① General purpose mid-range molecular weight Acrylic Resin
② High Gloss and Holdout
③ Promotes Resolubility
④ Fine Clarity
Specification:
| Appearance | Clear Flakes or granular |
| Non-Volatile (%) | 98.7 |
| Density (g/cm3, 25℃) | 1.16 |
| TG(℃) | 85 |
| Acid number | 215 |
| molecular weight | 8500 |
| softening point, Ring &Ball (℃) | 165 |
| Total VOC (wt. %) | 1.3 |
Application:
Water Based Printing Ink, Water Based Varnish, pigment grinding vehicle, polymer surfactant for emulsion
Packing: 25kgs net per bag.
Store: Should be stored in dry, aeration area, avoiding the wet. The valid store period is two years.
Dissolution method
| material | BAW-563/567 (permillage) | Remark | |
| 1 | purified water | 621.50 | |
| 2 | Solid resin | 300 | According to user`s request |
| 3 | defoamer | ||
| 4 | ammonium water(25%) | 78.00 | |
| 5 | MEA(monoethanolamine) | (78.00) | 5,6,7 can be adjust as per request to instead of ammonium water. |
| 6 | DMEA | (78.00) | |
| 7 | AMP-95 organic ammoniates | (78.00) | |
| 8 | Alcohols(enthanol or isopropanol) | Adjust the liquid resin dry speed | |
| 9 | defoamer | 0.50 | Add when you need |
| Total | 100 |
Profess flows:
1. First put quantitate water into dispersal cylinder, and open disperser 600RPM/min.
2. Put solid acrylic resin, 1200RPM/min.
3. Add ammonia (25%) solution slowly in batch (suggest add in three time 40%, 40%, 20%, time interval control in 20 minutes).
4. Stir until completely dissolved solid resin (about 4-4.5h)
5. After stirring dissolved, half speed can reduced to 1000r/min.
6. Keep the PH 8.5-9.2 (If the PH need to put ammonia, and still adjust PH to 8.5-9.2).
Packing image:
