550Mpa PP Macro Fiber Embossed Reinforced Concrete Panel Structure For Various Engineering Fields
PP macro fiber embossed Description
Briture Synthetic pp macro fiber embossed is made of Polypropylene.
PP macro fiber embossed are wrapped in bundles of water-soluble film and packed in cartons. When used, just put the whole boxes of the fibers into concrete.
The cartons and film are dissolved in water and the fibers are evenly dispersed in the concrete mixture.
PP macro fiber embossed available Length: 48mm, 54mm, 64mm
PP macro fiber embossed Features:
1. All grades of concrete to provide good anti - fatigue, anti - shrinkage, anti - seismic and good toughness.
2. Simple operation, not easy to group, safety, reasonable price, cost savings..
3. It can be used in highly corrosive, humid environment.
4. The surface has been embossed, which greatly improved the cohesive force between fibers and concrete, and also boosts shrinkage
resistance and crack resistance.
5. The strength of synthetic macro fiber is not as strong as that of steel fiber, but the experiment shows that under the same conditions, each
cubic meter concrete needs 3kg-6kg of synthetic macro fiber, while steel fiber needs 25kg-40kg. The results show that the concrete with
macro synthetic fiber has better toughness and anti-microcrack effect.
PP macro fiber embossed Proposed Dosage:
The dosage rate is dependent on the actual application however the minimum dosage range of pp macro fiber embossed is 3kg/ m3-6kg / m3.
PP macro fiber embossed Typical Application:
PP macro fiber can be used for shotcrete, concrete engineering, such as foundations, roads, Bridges, DAMS, especially in the deformation and toughness of the higher requirements of the project, such as mining and water conservancy and hydropower projects.
PP macro fiber embossed Specification:
Fiber Dimension | L: 48mm/54mm/64mm;T: 0.55-0.60mm; W: 1.30-1.40mm |
Melt Point | 170℃ |
Density | 0.91g/cm3 |
Melt flow | 3.5 |
Acid&alkali resistance | Excellent |
Moisture Content | ≤0% |
Certificate: